1、培訓過程中，如有部分內容理解不透或消化不好，可免費在以后培訓班中重聽；
        2、培訓結束后,授課老師留給學員聯系方式,保障培訓效果,免費提供課后技術支持。
        3、培訓合格學員可享受免費推薦就業機會。

1：Installation of the Student Edition

2：Patran Home Tab Tools Overview

3：Bending Stresses of a Loaded Beam

4：Bending Stresses, Displacements and Free Body Diagram of a Frame

5：Total Response of an Undamped System

6：Linear Static Analysis of a Rigid Frame

7：Linear Static Analysis of a Composite Plate

8：Linear Statics, Principal Stress and Stress Transformation

9：Linear Statics, Plane Strain with 2D Solids

10：Linear Statics, 2D Shells in Spherical Coordinates

11：Linear Static Analysis of a 2D Axisymmetric Solid

12：Linear Static Analysis of a 3D Solid

13：Linear Statics, Pinned Truss Analysis

14：Nonlinear Static Analysis, Large Deflection

15：Linear Statics, Thermal Stress with Solids

16：Superposition of Linear Static Results

17：Normal Modes, Point Masses and Linear Springs

18：Normal Modes, Shells and Cylindrical Coordinates

19：Normal Modes, Pshells and Cylindrical Coordinates

20：Buckling, shells and Cylindrical Coordinates

21：Buckling, Flat Plates

22：Direct Transient Response, Solids and Cylindrical Coordinates

23：Modal Transient Response w/ Bars, Springs, Masses & Rigid Body Elem.

24：Direct Nonlinear Transient, Stress Wave Propagation with 1D Elements

25：Direct Frequency Response, Eccentric Rotating Mass with Damping

26：Modal Frequency Response, Enforced Base Motion

27：Complex Modes, Direct Method

28：Transient Heat Transfer with Phase Change

29：Steady State Heat Transfer

30：Freebody Loads, Pinned Truss Analysis

31：S-N Analysis

32：Rainflow Cycle Counting

33：Multiple Loading, Fatigue Analysis

34：Seam Welds
1：Installation of the Student Edition
2：Patran Home Tab Tools Overview
3：Bending Stresses of a Loaded Beam
4：Bending Stresses, Displacements and Free Body Diagram of a Frame
5：Total Response of an Undamped System
6：Linear Static Analysis of a Rigid Frame
7：Linear Static Analysis of a Composite Plate
8：Linear Statics, Principal Stress and Stress Transformation
9：Linear Statics, Plane Strain with 2D Solids
10：Linear Statics, 2D Shells in Spherical Coordinates
11：Linear Static Analysis of a 2D Axisymmetric Solid
12：Linear Static Analysis of a 3D Solid
13：Linear Statics, Pinned Truss Analysis
14：Nonlinear Static Analysis, Large Deflection
15：Linear Statics, Thermal Stress with Solids
16：Superposition of Linear Static Results
17：Normal Modes, Point Masses and Linear Springs
18：Normal Modes, Shells and Cylindrical Coordinates
19：Normal Modes, Pshells and Cylindrical Coordinates
20：Buckling, shells and Cylindrical Coordinates
21：Buckling, Flat Plates
22：Direct Frequency Response, Eccentric Rotating Mass with Damping
23：Modal Transient Response w/ Bars, Springs, Masses & Rigid Body Elem.
24：Modal Transient Response w/ Bars, Springs, Masses & Rigid Body Elem.
25：Direct Nonlinear Transient, Stress Wave Propagation with 1D Elements
26：Modal Frequency Response, Enforced Base Motion
27：Complex Modes, Direct Method
28：Transient Heat Transfer with Phase Change
29：Steady State Heat Transfer
30：Freebody Loads, Pinned Truss Analysis
31：S-N Analysis
32：Rainflow Cycle Counting
33：Multiple Loading, Fatigue Analysis
34：Seam Welds